Home > Module > Introduction to GSM/GPRS Modems

Introduction to GSM/GPRS Modems

A GSM modem is a wireless modem that works with a GSM wireless network. A wireless modem behaves like a dial-up modem. The main difference between them is that a dial-up modem sends and receives data through a fixed telephone line while a wireless modem sends and receives data through radio waves.

A GSM modem can be an external device or a PC Card / PCMCIA Card. Typically, an external GSM modem is connected to a computer through a serial cable or a USB cable. A GSM modem in the form of a PC Card / PCMCIA Card is designed for use with a laptop computer. It should be inserted into one of the PC Card / PCMCIA Card slots of a laptop computer.

Like a GSM mobile phone, a GSM modem requires a SIM card from a wireless carrier in order to operate.

As mentioned in earlier sections of this SMS tutorial, computers use AT commands to control modems. Both GSM modems and dial-up modems support a common set of standard AT commands. You can use a GSM modem just like a dial-up modem.

In addition to the standard AT commands, GSM modems support an extended set of AT commands. These extended AT commands are defined in the GSM standards. With the extended AT commands, you can do things like:

  • Reading, writing and deleting SMS messages.
  • Sending SMS messages.
  • Monitoring the signal strength.
  • Monitoring the charging status and charge level of the battery.
  • Reading, writing and searching phone book entries.

The number of SMS messages that can be processed by a GSM modem per minute is very low, only about six to ten SMS messages per minute.

Related posts:

  1. Introduction to AT Commands AT commands are instructions used to control a modem. AT is the abbreviation of ATtention. Every command line starts with “AT” or “at”. That’s why modem commands are called AT commands. Many of the commands that are used to control wired dial-up modems, such as ATD (Dial), ATA (Answer), ATH (Hook control) and ATO (Return [...]...
  2. Which is Better: Mobile Phone or GSM/GPRS Modem? UNMJ4ZZZS4U3 In general, a GSM/GPRS modem is recommended for use with a computer to send and receive messages. This is because some mobile phones have certain limitations comparing to GSM/GPRS modems. Some of the limitations are described below: Some mobile phone models (example: Ericsson R380) cannot be used with a computer to receive concatenated SMS messages.What is a [...]...
  3. What is a GPRS Modem? A GPRS modem is a GSM modem that additionally supports the GPRS technology for data transmission. GPRS stands for General Packet Radio Service. It is a packet-switched technology that is an extension of GSM. (GSM is a circuit-switched technology.) A key advantage of GPRS over GSM is that GPRS has a higher data transmission speed. GPRS [...]...
  4. What is an SMS Gateway? One problem of SMS messaging is that SMSCs developed by different companies use their own communication protocol and most of these protocols are proprietary. For example, Nokia has an SMSC protocol called CIMD whereas another SMSC vendor, CMG, has an SMSC protocol called EMI. We cannot connect two SMSCs if they do not support a [...]...
  5. AT Command Operations There are four types of AT command operations: Test operation. A test operation is used to check whether a certain AT command is supported by the GSM/GPRS modem or mobile phone. Set operation. A set operation is used to change the settings used by the GSM/GPRS modem or mobile phone for certain tasks. Read operation. A read operation [...]...
  6. SIM300C/340C GSM/GPRS Modem Product Name: SIM300C/340C The SIM300C/340C is a complete Tri-Band/Quad-Band GSM/GPRS solution in a compact plug-in module with DIP board-to-board connector, which can be used in M2M applications such as telemetry, telematics and other M2M mobile data communication systems. • DIP type board-to-board connector suit for vehicle application • Customized MMI and keypad/LCD support • An embedded Powerful TCP/IP [...]...
  7. SIM508/548 GSM/GPRS/GPS Modem SIM508/548 module is a Tri-Band/Quad-Band GSM/GPRS-enabled module that is also equipped with AGPS technology. The compact design of the SIM508/548 makes it easy to integrate GSM/GPRS & GPS as an all-in-one solution. You will save significantly both time and cost for the integration of additional hardware components. The combination of both technologies can fit almost [...]...
  8. GPS Interface to a GPS By Michael Simpson These articles were featured in Servo Magazine Oct 2007 – Jan of 2008 Part 1 Support Files Part 2 Support Files Part 3 Support [...]...
  9. Holux M-89 GPS Module Product Name: Holux M-89 GPS Module Overview M-89 is an ultra miniature 25.4 x 25.4 x 3 mm GPS engine board designed by low power consumption MTK GPS solution. It provides superior sensitivity up to -159dBm and fast Time-To-First-Fix in navigation application. The stable performance of M-89 is your best choice to be embedded in your portable [...]...
  10. GSTAR GS-89m-J GPS Module GPS module, GPS, wireless module, GPS receiving module, GS – 89m – J is a high and low power of intelligent satellite receiving module or called satellite receiving engine, it adopts the l LianFa technology company design of 32 channel positioning receiver chips, is a complete satellite positioning receiver with comprehensive functions, can satisfy [...]...
  1. April 28th, 2010 at 04:19 | #1

    :razz:

  1. No trackbacks yet.
icon_wink.gif icon_neutral.gif icon_mad.gif icon_twisted.gif icon_smile.gif icon_eek.gif icon_sad.gif icon_rolleyes.gif icon_razz.gif icon_redface.gif icon_surprised.gif icon_mrgreen.gif icon_lol.gif icon_idea.gif icon_biggrin.gif icon_evil.gif icon_cry.gif icon_cool.gif icon_arrow.gif icon_confused.gif icon_question.gif icon_exclaim.gif 

Switch to our mobile site